Replacement Gear box for Drill - Dexter UP20 screwdriver

Geschrieben von: Antoine Lafillé
  • Kommentare: 0
Replacement Gear box for Drill - Dexter UP20 screwdriver

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

Keine Schätzung

Einleitung

  1. Remove the battery and the mandrel. Loosen the screws with a T10 bit or a T10 screwdriver.

    • Remove the battery and the mandrel. Loosen the screws with a T10 bit or a T10 screwdriver.

  2. Remove the top shell and then separate the Gearbox from the Engine.

    • Remove the top shell and then separate the Gearbox from the Engine.

  3. Remove the protective cover from the new Gearbox and then assemble it to the engine while respecting the demers. Reposition the LEDs if necessary.

    • Remove the protective cover from the new Gearbox and then assemble it to the engine while respecting the demers. Reposition the LEDs if necessary.

  4. Reposition the top shell and tighten the screws.

    • Reposition the top shell and tighten the screws.

Abschluss

To reassemble your device, follow the instructions in reverse order.

Tinte & Feder

Antoine Lafillé

Mitglied seit: 30/01/20

945 Reputation

0 Kommentare