Replacing Creative Zen X-Fi Midsection Plate

Geschrieben von: Westley Courchene
  • Kommentare: 0
Replacing Creative Zen X-Fi Midsection Plate

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

3 Minuten

Einleitung

This midsection plate is used to separate and organize the interior of the device.

  1. WXPPdUPvgd6bJdII
    WXPPdUPvgd6bJdII
    VMLOnCyGjCToyZwJ
    JkdVpSSaESiNCdIk

    • Using a spudger, wedge the tip between the front and back case to pry them apart.

    • Be careful to not apply excessive force since there are six fasteners on the screen's side that holds the cases firmly together.

  2. KuwbhQbJXG5uIOpk

    • The black rubber button pad can be removed by simply picking it up.

  3. JHaujh4iPb2hgltN

    • Flip the LCD screen off the midsection plate to gain access to the space around the input button chip.

  4. bpK263gk4DRuNHax

    • Using a spudger, pry off the button input chip from the mid-section of the device. To gain best leverage, start at the bottom right corner and level your way up the side of the chip.

    • Be aware that the button input chip is glued to the mid-section, so some extra force may be required.

  5. K2ErRgAPRt53In4N

    • Lift open the LCD screen and button input chip to access the entire midsection plate.

  6. YCYsPriVwQ1YtxYa

    • Use a Phillips Head screwdriver to unscrew the three 3/16 inch screws that were underneath the button input chip.

  7. sC2HAmHtOINtetqv

    • Use a Phillips Head screwdriver to unscrew the three 3/16 inch screws that were underneath the LCD screen.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Westley Courchene

Mitglied seit: 13/01/15

3341 Reputation

0 Kommentare