Replacing a Sprinkler Extension

Geschrieben von: Abagayle Serreyn
  • Kommentare: 0
Replacing a Sprinkler Extension

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

25 - 35 Minuten

Einleitung

This guide is intended to show a non expert how to properly replace a broken sprinkler extension. A broad overview of the steps include digging a hole, unscrewing the extension, and replacing the extension. All you need are some basic tools and general knowledge about actions you preform on a daily basis. Before beginning the project, make sure the water is off and check for hazardous insects. Be aware that digging forcefully could damage the pipeline.

  1. RRTTeen1KjoTMiQC

    • Dig a one foot wide hole around the broken sprinkler extension down to the pipe fitting.

    • The pipe fitting is usually about one foot underground.

  2. QKJrN1eRf51ECafx

    • Dig around the pipe fitting with a trowel to provide clear access.

  3. gjiNQoTweMbnhwXQ

    • Clean the area around the fitting with water until the fitting is mostly free of dirt.

  4. ddeXk2gV4BIFTtA1
    ddeXk2gV4BIFTtA1
    SWwEaABxcW3bogKM

    • Unscrew the sprinkler extension from the pipe fitting.

    • Once the extension is removed, water may come out of the open pipe fitting.

  5. tLJaqfocGSQViXOC

    • Screw the new sprinkler extension in securely.

  6. juknqgQyrdwbVqUF
    juknqgQyrdwbVqUF
    hGNZHOZX6AFprXlI

    • Test the sprinkler to ensure that there are no leaks.

    • Refill the hole tightly.

Abschluss

If you have completed the steps successfully you should have a fully functioning sprinkler extension.

Tinte & Feder

Abagayle Serreyn

Mitglied seit: 11/09/15

111 Reputation

0 Kommentare