Einleitung
If your controller(s) malfunction, you can replace the circuit boards. You only need a Phillips #1 screwdriver.
Werkzeuge
-
-
With the controller on its face, remove the five 6 mm Phillips #1 screws.
-
After removing the screws, carefully lift the controller casing .
-
-
-
Pinch the top and bottom of the shoulder buttons and lift them out.
-
Below each shoulder button, there are small elastic pads. To remove them, pinch the pads and slide them out.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
