Einleitung
The Ricoh Super 8 800z operates using a 8mm film cartridge. Inside this film cartridge is a reel with an 8mm film. The hooks you will be replacing are what latches on to and rotates this reel.
Werkzeuge
-
-
Open the device's film cartridge door by pulling the release switch towards the eyepiece.
-
Lay the device with the left side down and the door open to allow access to the film cartridge hooks.
-
-
-
Using a Phillips #000 screwdriver, remove one of the screws from the rotating hooks in the center of the film bay.
-
-
-
Now put your finger on the side of the screw you just removed, and take out the remaining screw with a Phillips #000 screwdriver.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
