Einleitung
This process involves removing the back cover and the front cover of the camera. After, the lens can be removed from the camera body.
Werkzeuge
-
-
Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.
-
-
-
Open the film compartment.
-
Press your finger on top of the grey latch on the left side of the camera.
-
-
-
Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place.
-
Use your fingers to completely remove the metal pin.
-
Remove the film compartment door.
-
-
-
Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.
-
-
-
Loosen the front cover from the left and right sides of the camera.
-
Remove the front cover.
-
-
-
Unscrew three screws from the outermost plastic plate covering the lens.
-
After the screws are removed, the outermost plate can be removed.
-
-
-
Remove the ring shaped metal brace.
-
Using fingers or tweezers, remove the lens from the camera.
-
To reassemble your device, follow these instructions in reverse order.