Ridgid R2601 Bearing Replacement

Geschrieben von: Gary Garner
  • Kommentare: 1
Ridgid R2601 Bearing Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 Minuten

Einleitung

In this guide, we will replace the bearing in the Rigid R2601 orbital sander. This part is often subject to damage because it is a moving part. Before starting this guide, please unplug and turn off the sander.

  1. uSCrJjGe4SnfgSU2

    • Turn the sander upside down so that the base faces you.

    • Remove the four 6.4 mm screws from the bottom of the base using a Torx T-25 screwdriver.

  2. GE6uVPAVa32w21qL

    • Remove the base.

  3. YYJv2RtkEjT1KgTc

    • Remove the 10 mm screw from the center of the bearing using a Torx T-20 screwdriver.

  4. eJQrYW2MhjgdssLQ

    • Remove the bearing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Gary Garner

Mitglied seit: 03/10/19

274 Reputation

Ein Kommentar

What is the bearing size?

Dagan Larson -