Ridgid R2601 Speed Dial Replacement

Geschrieben von: Ellie Lott
  • Kommentare: 0
Ridgid R2601 Speed Dial Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

5 Minuten

Einleitung

If you are not able to change the speed settings on your sander, the speed dial is probably at fault. The dial can become worn down, meaning that it needs to be replaced. Make sure that the sander is unplugged when completing this replacement.

  1. nZgXvxiohhJYSNPf

    • Remove the four M3.5 x 16 mm screws from the top cover using a Torx T10 screwdriver.

  2. Z4lLljwSEJTGgGRx

    • Pull off the top cover.

  3. xcDD4LWVwNQ1ScuP
    xcDD4LWVwNQ1ScuP
    KnoTIwTcnHHWFcFc

    • Remove the orange speed dial simply by pulling it out using your hands.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Ellie Lott

Mitglied seit: 06/02/19

461 Reputation

0 Kommentare