Ridgid R2611 Hook and Loop Backing Pad Replacement

Geschrieben von: Luke Stokes
  • Kommentare: 0
Ridgid R2611 Hook and Loop Backing Pad Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

5 Minuten

Einleitung

The hook and loop can wear down over time, which is completely normal due to constant use. The replacement parts for this guide can be easily purchased.

  1. 3eNeKnjQHYbkrmXS

    • Flip the sander on its side to expose the bottom.

  2. GCbpJmJkOgNeHDRg

    • Remove the four 2.5 mm Phillips #1 screws with the flathead screwdriver.

  3. jL6mZKt6QMRpfyHg

    • Remove the hook and loop backing pad from the sander.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Luke Stokes

Mitglied seit: 16/01/19

461 Reputation

0 Kommentare