Ridgid R82005 LED Light Replacement

Geschrieben von: Andrew McPherson
  • Kommentare: 0
Ridgid R82005 LED Light Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

10 Minuten

Einleitung

  1. xvJJFuioskdVaGAE

    • Eject the battery from the drill.

    • Unscrew the seven M3x15.3mm screws, with the 2mm hex screwdriver bit, that secures the Housing Assembly.

  2. U1qyAM2iBwuEyQQa

    • Push the metallic Housing Connecting clip out with flat side of the plastic opening tool.

    • Eject battery before attempting this step.

  3. DQ1VI5UxR22nCXRu
    DQ1VI5UxR22nCXRu
    xQ2Ok5BqM2ssGsj3

    • Remove the top half of the Housing Assembly.

  4. ipjSbu3TmZFJNdHU
    ipjSbu3TmZFJNdHU
    YWkuhHDkLVtOBZRo

    • Grasp carefully the top and bottom of drill components.

    • LED light needs to be manually removed.

    • Lift and transfer, as a whole, the drill components from the old housing assembly to the new housing.

    • Make sure all drill components fit properly in the grooves of new Housing Assembly.

  5. hokH1uDFegqKTgf3
    hokH1uDFegqKTgf3
    GwuPFjBZZxEndOJ1

    • Unplug the LED connector gently.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andrew McPherson

Mitglied seit: 14/02/19

443 Reputation

0 Kommentare