Ring Video Doorbell Motherboard Replacement

Geschrieben von: Abdulrahman
  • Kommentare: 1
Ring Video Doorbell Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

15 - 20 Minuten

Einleitung

In this guide, you will be shown how to take apart and replace the Motherboard of the Ring Video Doorbell step-by-step. You will need a Phillips screwdriver size PH00 and a Plastic Tool Opener.

  1. wmc6hJyUGEBjlFlw
    wmc6hJyUGEBjlFlw
    qWwG3ymLwLlhqjvr
    eWBGVcED1qeVmZUw

    • Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.

    • Pry open the aluminium plate using the Plastic Opening Tool(s).

    • Remove the 2 1 mm screws using the PH00 Phillips Screwdriver.

  2. oB2crvPEUVoYTGGa
    oB2crvPEUVoYTGGa
    ASfBKaYH4wt4WTxW
    EWEM1sHEyUbWXEox

    • Pry open the back case as shown using the Plastic Opening Tool.

    • Disconnect the battery from motherboard by carefully pulling up on the connector.

  3. nhqDUlWdLIOHnT2V
    nhqDUlWdLIOHnT2V
    1E2SgMIeGNyZECGF
    4HHH5UIpS5JwgTxx

    • Unscrew the 9 1 mm screwdrivers using a PH00 Phillips Screwdriver.

    • Carefully detach the motherboard, from the housing unit using your hands.

  4. J5NWhVlVeljVF1gM
    J5NWhVlVeljVF1gM
    Uyp3GMlhLhM5ZVMT

    • Detach the upper part of the motherboard from the bottom, using your hands.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Abdulrahman

Mitglied seit: 20/02/18

658 Reputation

Ein Kommentar

Where can you buy a replacement motherboard?

Barry Specter -