Einleitung

  1. 3HHNMqHhVH3XlDge
    3HHNMqHhVH3XlDge
    iceLVtvMTiKEqiWG
    • Make sure the toaster is unplugged before dissembling.

    • Turn the toaster over and remove the rubber bumper feet.

  2. LnmryUvL1Sv3fF2Y
    LnmryUvL1Sv3fF2Y
    UiUgxKjDeqOIjg5h
    • Use a Phillips head screwdriver to remove all four 12 mm screws that are attached to the toaster shell.

  3. LYLIBQ6AMfHOnRwy
    LYLIBQ6AMfHOnRwy
    Cq4WMuECIryZbWHy
    Uea3Beu5XJeFCBFR
    • With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster.

    • When reassembling the toaster, make sure that the back of the dial lines up with the slot, both in position and orientation (the dial and slot are not perfect circles - they have a notch).

    • The only object holding the shell onto the toaster now is the grey part of the lever.

  4. qNWr5lDjPddNAVMm
    • Reach into the shell and grab the back white part of the lever.

    • Hold the grey lever with both your index finger and middle finger. Next, pull it.

    • Pulling too hard will break the mechanism that holds the grey handle onto the white lever.

    • Next, remove the shell.

  5. xnOojdFWpbRNbEZH
    • After disassembling the toaster, turn the back side of the toaster towards you.

    • On the back of the toaster the metal tabs attached to the bread shelf should be visible.

    • These tabs will sometimes get caught in the shaft which disables your toaster from returning the bread.

  6. 1tkUPjEOw12UodOo
    • Twist the metal tabs to vertical position to allow them to glide along the slot.

    • Push down on the white lever on the opposite side repeatedly to ensure that the metal tabs will no longer stick.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kristen

Mitglied seit: 26/09/12

108 Reputation

0 Kommentare