Roku 2 Remote Control Buttons Replacement

Geschrieben von: Alex Saltos
  • Kommentare: 11
Roku 2 Remote Control Buttons Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

Keine Schätzung

Einleitung

  1. D6ric5TvAFLVtT6u

    • Turn over remote and press down on tab to remove.

  2. t4rpReky4b36AOVx

    • Remove batteries

  3. J1vEMMBJPKRJVNqr

    • Place the new batteries into the remote. Make sure the positive terminal is facing the positive terminal of the slot. Similarly the negative terminal should be touching the negative terminal. If done right the batteries should be facing opposite directions of each other.

    • Insert Roku tab back on to its slot.

  4. 5wQK1NQUCfmQlAyj

    • After removing the batteries use the 000 phillips to remove the screw

    There is no screw.

    Ernst B -

    No screw on mine either.

    stevemcdowell -

  5. 4lSR4Q2HrcElV1Pm

    • Use the plastic opening tools to pry open the remote.

    What is the plastic opening tool?

    obimokwenye -

  6. KnPuRrnqhPprXjJ1

    • Lift the top of the remote off very carefully so that board does not fall

  7. XFgKXte1xj3IrIlH

    • Remove and replace buttons

    Provide link to part numbers and places to order replacements

    Qris Jonz -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Alex Saltos

Mitglied seit: 27/08/15

526 Reputation

7 Kommentare

Well, hmmm; why is it there is actually no screws in mine nor the ones for others. None in mine and 4 in the ones for volume control over tlc tv's etc??

Junebug -

I use my mobile to control and I download it at: https://apps.apple.com/us/app/roku-remot...

It's better for me

donor -

And where exactly do you buy the new buttons ??

bonzo dog -

And just where exactly do you buy the new buttons??

bonzo dog -

So I tried every trick to get my remote to work (all the Youtube tricks). Found this, took the remote apart and got it to work with the cover off. New remote coming in two days but I just wanted to say thanks cause now I can watch TV while I wait for my new remote to arrive!!!!!!!!!!! I would not advise using the remote with the cover off, just sayin, but I am lol….

Joe MacRitchie -

I would like to have a view of the pc board

Alden Holmes -

The OK button on my remote stopped working. I used these instructions to open it, cleaned the button contacts on the board with isopropyl alcohol, then very carefully reassembled it, taking care to observe the orientation of some plastic films carrying contacts for some of the buttons. It now works, though I lost a few bits of plastic opening it. This was a pain. Except for the savings in electronic waste, it was not worth the price of a new remote.

Ismael Colón -