Roku 2 Roku 2 Motherboard Replacement

Geschrieben von: Eric Rawls
  • Kommentare: 2
Roku 2 Roku 2 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

Keine Schätzung

Einleitung

  1. Z42dmvySjNZfbRpW

    • Heat up the iOpener for 30 seconds in the microwave and place across rubber pads on the back of the device.

    • It may take multiple heats, left for a minute at a time, to properly loosen the glue.

  2. IKPJpPOdOFfpBWFY

    • Gently use the plastic opening tool to pry the rubber pads off.

  3. ukyGhaTmiZxGxQQL

    • Remove the four Phillips #000 screws from the bottom of the case.

  4. BVmGoF2fXJlMLUVH

    • Gently remove the under side of the device.

  5. kZGtV4vifhOobLqT

    • Remove the middle component that is held in place by the top and bottom of the device.

  6. yLuVhBkisdHqUBLw

    • Remove the cover over the A/V ports on the front of the device.

    How does one replace a HDMI port on a Roku 2, and is the hdmi port freely available.

    Carlo Schroeder -

    I have a Roku 3, and it powers up, but their is not signal reaching my TV, it appears that all other functions are working, like WiFi transmission, I can hear the control sounds when pressing the buttons on control.

    Carlo Schroeder -

  7. SUwFJdAyFmFQxmQv

    • Remove the board from the plastic enclosure.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Eric Rawls

Mitglied seit: 25/08/15

360 Reputation

0 Kommentare