Einleitung

This guide will allow you to detach the faceplate in order to replace existing buttons or screen on your Sony Ericsson W890i

  1. rQHVWnFLmRKTpyrd
    • Flick the two lock tabs into the unlocked positions by pushing each button forward.

  2. xOeSyTFqNXyXvSPd
    • Pop the back cover up using the groove on the top of the phone.

  3. Is5ZR4dpyLMfkOFv
    • You can now access the phone's battery.

    • Using a spudger, remove the battery and set it aside.

  4. JLsKdJSuePXTyUIE
    JLsKdJSuePXTyUIE
    wRyEWT24khVLsGHJ
    • Remove the two small rubber pieces that cover the lower screws.

    • Using a T-6 Torx wrench or screwdriver, remove all four of the small screws at the top and bottom corners on the back of the phones.

  5. cCkrllXQwaTRttqE
    • Gently pry off the faceplate using a plastic opening tool.

    • Insert the plastic opening tool into the middle of the front and back panels of the phone.

  6. XHRSUfRNCYo5wIqY
    • Separate the front and back panels that were pryed open with the plastic opening tool.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Bob

Mitglied seit: 15/04/13

316 Reputation

0 Kommentare