Einleitung
Prerequisite-only! Follow this guide for important safety steps to perform before beginning work on the Barreto Tiller E1320 2016.
-
-
Grab the plastic housing at the end of the spark plug wire and pull firmly to disconnect it.
-
-
-
Flip the ignition switch to the OFF position.
-
Ensure the wheel drive control lever is set to the neutral position.
-
-
-
Pull the locking pin out and rotate it 90˚ to unlock the right wheel from the hub.
-
Repeat for the left wheel.
-
-
-
Insert wheel chocks underneath each wheel to keep the device stationary during disassembly.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
