Samsung 27E510C Motherboard Replacement

Geschrieben von: giggythore

Kommentare: 0

Schwierigkeitsgrad

Moderate

Schritte

Zeitaufwand

4 - 5 Minuten

Einleitung

The motherboard is the electronic hub inside the monitor connecting each of its electrical components, including the navigation button, the screen, and the HDMI/VGA ports.

Werkzeuge

Schritt 1

Use the #1 Phillips head screw driver to remove each 13.75mm length screw from the rear panel.
The screw alone with the ports is a different size than the rest, its length is 12mm.

Schritt 2

Insert the heavy duty spudger in between the monitors back panel and its frame.
Use the heavy duty spudger to pry open the back panel.
Over aggressive prying could break the tabs holding the back panel in place.

Schritt 3

Remove the navigation button connector by pulling while holding down its thumb tab.

Schritt 4

Remove the screen connector by gripping its sides and gently pulling while wiggling back and forth.

Schritt 5

For the ribbon cable, Lift the tab from the side facing the inside of the mother board with your fingernail or a spudger.
Remove the cable by pulling while lifting slightly.
If the cable does not come out easily, than the secure tab may not be fully opened.