Einleitung

  1. ib11hb6j5sJorfDF
    ib11hb6j5sJorfDF
    W1GeQTUJCqKIUopi
    • Remove the back panel of the device by taking out the seven screws on the back panel of the device.

    • Four of the screws are under the rubber feet so they will need to be removed. To remove the feet, pry them off with the spudger.

  2. cGVD1Gme4EoiCRox
    cGVD1Gme4EoiCRox
    vAwIoZWJgGEKMHMU
    VJyUkW3dkDlTWBUJ
    • Locate the wireless card. It is shown highlighted in picture one.

    • Detach the black and white cords connected to the wireless card and unscrew the screw holding in the card. They are shown highlighted in picture two.

    • Pull the card out of its slot and insert the new card. Reattach the wires and reassemble the device. Note: the white wire connects to the terminal closer to the screw and the black to the other terminal.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Garrett Kissinger

Mitglied seit: 24/02/14

704 Reputation

0 Kommentare