Einleitung
Use this guide to remove the volume/scroll wheel.
Werkzeuge
-
-
Hold the device with the screen facing away from you and the camera towards you.
-
Place your thumb on the bottom half of the phone and slide the cover off while gently pushing down on the cover.
-
-
-
Place your fingers on both sides of the bottom of the battery and lift upwards.
-
Pull the battery away from the phone.
-
-
-
Use the spudger to remove the rubber stoppers from the top of the cover.
-
Use the Phillips 00 screw driver to remove the screws from each of the four corners and the two on sides (six total).
-
-
-
Use the spudger to loosen and separate the front and back covers.
-
Pick up the back cover once loosened.
-
Remove the gold wire connecting the back cover to the motherboard to completely separate the covers.
-
-
-
Use the screwdriver to unscrew the four screws that hold the scroll wheel in place.
-
Use your fingers to remove the scroll wheel and the metal plate that it is attached to.
-
-
-
Use the spudger to unsnap the gold wire connection that connects the back casing to the logic board.
-
Use the spudger to unsnap the gold wire connection that connects the scroll wheel assembly to the logic board.
-
To reassemble your device, follow these instructions in reverse order.