Samsung Captivate Rear Case Replacement

Geschrieben von: Christopher
  • Kommentare: 0
Samsung Captivate Rear Case Replacement

Schwierigkeitsgrad

Difficult

Schritte

7

Zeitaufwand

5 - 10 Minuten

Einleitung

Cracked frame? Use this guide to repair your Captivate's rear case.

  1. EybUoyOHCfFVhKId

    • Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.

    • Lift up the back cover.

  2. QTmnfmmV1NUlLDEt

    • Place your finger on the bottom of the battery and lift to remove.

  3. dZLFWq1tnZfZ3pMw

    • Replace the old battery with the new one.

  4. jXmfv2gShBUAliBW

    • Insert the spudger underneath the bottom section of the phone.

    • Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.

  5. JBrMmkHFGr6MQu2B

    • Remove the six 4.5mm #000 Phillips screws.

  6. 5X2vNmDSgLFUaNuK
    5X2vNmDSgLFUaNuK
    FCrTFGPC6qYKQbeT
    ajWddd55oyIbwOFq

    • Starting at a bottom corner, use the spudger to separate the rear case from the front display.

    • Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.

    • Be careful when detaching the top. Free each side, stopping short of the center of the cover. Apply backward pressure on both corners with a finger applying pressure on the center, and slide the whole back cover toward the bottom of the device. Note: forcing the cover can result in cracked plastic.

  7. 5cFqIQlECQFFjDQp

    • Separate the rear case from the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Christopher

Mitglied seit: 06/10/11

643 Reputation

0 Kommentare