Samsung Galaxy A10e Motherboard Cover Replacement

Geschrieben von: Thomas Boland
  • Kommentare: 2
Samsung Galaxy A10e Motherboard Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

12

Zeitaufwand

15 - 25 Minuten

Einleitung

Prereq for replacing the motherboard cover in your Samsung Galaxy A10.

  1. ZV5rvsFQIWR3YRRC
    ZV5rvsFQIWR3YRRC
    BivE1WKvFHHshfjG

    • Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray.

    • Press to eject the tray.

  2. r3HEYQFA2ZdgR22o
    r3HEYQFA2ZdgR22o
    rTE23V51PZSXulFn

    • Remove the SIM card tray from the phone.

    • The SIM card(s) and SD card will fall out of the tray easily.

    • When reinserting the tray, ensure the SIM card and SD card are in the correct slots and oriented correctly.

    • For dual-SIM versions of this phone, there may be two SIM cards. Ensure the SIM cards are placed in the slots corresponding to the correct phone lines.

  3. ZhNlY1GUbXqUm6PN

    • The back cover is held in place by plastic clips.

    • Insert an opening pick between the screen and the back cover on the bottom of the phone where the charging port is located.

  4. JbnQNp1PHKnxDcG3

    • Slide the opening pick to the bottom left corner to release the clips.

  5. AdhXxV44uUAKUSNJ

    • Slide the opening pick along the left edge to the top left corner of the phone, to release the clips.

  6. WFkTvQpkTCXRRbp6

    • Slide the opening pick from the top left corner to the top right corner to release the plastic clips.

  7. LxOvKIscHyoCDQtG

    • Slide the opening pick from the top right corner to the bottom right corner to release the remaining clips.

  8. OpH6L1koMmwR1wnZ

    • Remove the back cover.

  9. TtUFIfPGB6MQBGxQ

    • Remove screws from the motherboard antenna cover.

    • 3 Phillips #00, 3mm length.

  10. KUNd2ME1FyCX1G2i

    • Use the tip of a spudger or tweezers to remove the antenna cover.

  11. owJFTDVlxoFxB11B

    • Remove screws from the motherboard cover.

    • 3 Phillips #00, 3mm length

    There’s actually a 4th screw on the top middle of this cover. Took me and my wife several minutes to figure that one out.

    Justin Wahlquist -

  12. eflhlOeEAyPEIVjZ

    • Use the tip of a spudger or tweezers to remove the motherboard cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Thomas Boland

Mitglied seit: 30/09/20

1467 Reputation

Ein Kommentar

I have looked literally everywhere and nobody is covering the top motherboard 2 connectors w/ Ribbons on top the black squares one camera and the 1 to the right how does that 1 to the right connect with the ribbon please help thank you

amandacrockett385 -