Samsung Galaxy Core Prime Back Camera Replacement

Geschrieben von: Adrian Sanchez
  • Kommentare: 0
Samsung Galaxy Core Prime Back Camera Replacement

Schwierigkeitsgrad

Difficult

Schritte

11

Zeitaufwand

15 Minuten

Einleitung

A problem you may find with your Samsung Galaxy Core Prime is a scratched camera lens. Instead of buying an entirely new phone you can instead replace the camera. For this guide you will need an iOpening tool, a metal spudger, a Phillips #00 screwdriver, or similarly shaped tools.

  1. SSZxcQtQi1QNnqWL

    • Turn the smartphone off by using the power button on the right-hand side.

  2. E3ACInHixkThOHCG

    • Turn the smartphone over so that the rear camera is face up.

  3. cXfVCc6bGRD3MQhH

    • Use your fingernail or a flat tool to lift the back cover.

  4. GyjtbBVJvHpb4ZfN
    GyjtbBVJvHpb4ZfN
    UUcdMPApTC5Wp4aV

    • Locate the battery near the bottom of the phone. The battery is square, flat, and is labeled 'SAMSUNG'.

  5. Eq2PXntItESGPBVN

    • Use your fingernail or a flat tool to lift the battery out.

  6. VPW1VUwZi1Mfg3cD
    VPW1VUwZi1Mfg3cD
    ypMstBZHIs61PbWF

    • Use a Phillips #00 screw driver to remove all eight 4mm screws from the midframe.

  7. Uwdl6JXHtDbcEpH1

    • Heat the frame with a heat gun or hair dryer until the adhesive is loose.

    • Take care when using these heat tools.

  8. JvxICFW3nvHtdOET

  9. LhOwVKpTWsbbgiGO
    LhOwVKpTWsbbgiGO
    RKLSISQMpRGLq54G

    • Disconnect the power ribbon on the left side of the phone either with your fingers or tweezers

  10. UfB6uZFTCn3hAJwF

  11. 2mnR3IhvTavkfxIW
    2mnR3IhvTavkfxIW
    X5BaYQbKejPQkOQI

    • Turn the Motherboard over and disconnect the ribbon connecting the camera to the Motherboard with an iFixit Metal Spudger.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Adrian Sanchez

Mitglied seit: 09/10/18

151 Reputation

0 Kommentare