Samsung Galaxy J7 V Motherboard Replacement

Geschrieben von: Jesse Cullen
  • Kommentare: 0
Samsung Galaxy J7 V Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

11

Zeitaufwand

7 Minuten

Einleitung

Use this guide to restore your Samsung Galaxy J7 V to working order with a motherboard replacement. This guide covers steps for replacing a motherboard by going through how to get under the screen, removing the front panel, the home button, and the battery of the phone to get to the motherboard itself.

  1. SWCCYVMaPDJeHSMr

    • Be very careful during this step if your display is not already broken, as the OLED display is very fragile.

    • Use a Jimmy tool to gently raise one of the corners of the display.

  2. lfWslMk4m1X5ADif

    • Gently slide the Jimmy tool around the entire perimeter of the phone.

    • We recommend heating up the phone prior to attempting the display removal as it weakens the adhesive and can massively decrease the risk of damage to the display.

  3. V6syNQqjG3fmieew

    • Carefully lift the display.

    • Be extra careful with the display's ribbon cables as they are very fragile.

  4. B4TW1EdEWSfmhf1N

    • Locate the socket of the home button.

    • Fit the metal spudger in between the socket and the home button.

  5. stJgs6mIjwhfkmDA

    • Take the metal spudger and slide it underneath the home button.

    • Lift up until the home button is removed from its socket.

  6. alRo4VnvGHxVuXYd

    • Use the indent on the right side of the phone to lift up.

  7. qfXKYNLsKwEAH2jE

    • Lift the back panel up and remove it.

  8. Pq2P15rSMaISCsQS

    • Lift from the bottom of the battery to remove it.

  9. lEoiqjyZoNOeLeWM

    • Remove fourteen screws from the midframe using a Phillips #00 screwdriver.

  10. ipB1URcRfQRSHiq6

    • Flip the phone to the back side where the battery was removed.

    • Apply pressure with your hands to pop the midframe off.

  11. kiVEPCXiuKHThLYh
    kiVEPCXiuKHThLYh
    1hYHhghxlBnttQAR

    • Flip the phone back over.

    • Remove the single black screw from the motherboard using a Phillips #00 screwdriver.

    • Place a few iFixit opening picks beneath the motherboard.

    • Spread the opening picks evenly around the motherboard to ensure it does not bend as you remove it.

    • Lift the motherboard using the iFixit opening picks.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jesse Cullen

Mitglied seit: 08/02/22

100 Reputation

0 Kommentare