Einleitung

This guide instructs on how to replace the front facing speaker and LED blinker.

  1. XecCKLTBNgmfBfxY
    XecCKLTBNgmfBfxY
    XSAJi14bTsEwBNRK
    p4ArZV5tLM4AHuJS
    • Before starting, ensure device is completely turned off.

    • On the back of phone, locate the slot on the top left corner.

    • Insert plastic opening tool or fingernail and pull up on the back plate.

    • With the corner released, slide your finger around the device between the back plate and the phone to release connectors.

    Bonjur vule vondre de telefon samsung galaxy mega ecron

    bucuresteanugigel -

    samsung galaxi mega

    bucuresteanugigel -

    0751571718 samsung galaxi mega

    bucuresteanugigel -

  2. DcNvXh4EcjjtCfci
    DcNvXh4EcjjtCfci
    vwRdREmKIhPahK1W
    CCSYILvRFECQlZCC
    • Insert fingernail into the slot on bottom of battery and gently pull up.

    • Remove the battery.

  3. eOrSgSr5OVQiXAKs
    eOrSgSr5OVQiXAKs
    DjobM4jA3VOxsuol
    VY4sZVV4jniAJnpb
    • Remove the 14 3.45 mm Phillips #000 screws from the assembly.

    • Gently, insert plastic opening tool into seam above the volume buttons of your phone.

    • You may substitute metal spudger for plastic opening tool to first start the opening of the seam. This may cause exterior cosmetic damage.

    If you insert a spudger from the battery compartment seam, you can start the opening without damage to the outside.

    Ted -

  4. vyKCve3BNHo3tNHU
    vyKCve3BNHo3tNHU
    2xQigLcTNJHEbqmH
    • Slowly slide plastic opening tool around the device to release all the connectors internal to the device.

    • The device should easily come apart after the plastic opening tool is slid around the entire device.

    • During reassembly, ensure volume and power buttons align properly.

  5. Crm1cjnkPKPW31IJ
    • Remove the black 2.55 mm Phillips #000 screw.

  6. gRHG2PXSyFSLJMMU
    • Remove the metal cover with the plastic opening tool.

  7. WJJjXTbXCWROHBbU
    WJJjXTbXCWROHBbU
    BnZMtqrpEZRnPBoD
    • Remove the motherboard clip from speaker assembly to the motherboard.

    • Gently lift the speaker and LED assembly out of the device.

    • Speaker assembly may be glued to the device, gently pry until it releases.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Max Rathman

Mitglied seit: 04/02/16

861 Reputation

0 Kommentare