Samsung Galaxy Note II Motherboard Assembly Replacement

Geschrieben von: Sam Goldheart
  • Kommentare: 4
Samsung Galaxy Note II Motherboard Assembly Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

Keine Schätzung

Einleitung

Prereq to remove the motherboard.

  1. fBJ3dEuj61gKxLHk
    fBJ3dEuj61gKxLHk
    QRFXjJqTDrRv1PCA
    pNlJgC12SqPjqp1W

    • Use a spudger to disconnect the vibrator/power button assembly cable connector.

    • Disconnect the antenna cable connector.

    • Disconnect the display cable connector.

    Dear Sirs,

    My Galaxy Note II is completely dead due to lightning in the house. I guess there is a fuse or a protection somewhere but I can not find it. Can you help ? Thanks in advance, Jose

    Jose -

    One idea would be to track backwards, i.e. check to see if current is reaching from the charge port to the mainboard. Looking at the following picture http://d3nevzfk7ii3be.cloudfront.net/igi... it seems like the fuse is - as expected - located right by the USB port. If you're lucky it could be as easy as replacing the charging board, a $10 component.

    hakro807 -

    My Note II LTE does not have the antenna cable like here

    Bubbele -

  2. UaXWqjR1meti6aRw
    UaXWqjR1meti6aRw
    RI5qsou5bdgpIkfx
    6WSRDFX1TKC5nmJo

    • Disconnect the front-facing camera cable connector.

    • Disconnect the headphone jack cable connector.

    • Disconnect the digitizer cable connector.

  3. QpRGJwcYky1TPAc6
    QpRGJwcYky1TPAc6
    XnD5aYfNOKe4jPmy
    D5cQnBUEhxTbOt1l

    • Use the spudger to disconnect the antenna cable connector from the motherboard.

    • Disconnect the soft button cable connector.

    • Disconnect the USB board cable connector.

  4. lBufmmfOqQfBX54N

    • Remove the 3 mm Phillips #00 screw securing the motherboard to the display assembly.

    Is it possible to replace my Note II N7105 motherboard to N7100? Is there some negative effects happen, if i did it?

    Eduardo Lucas III -

  5. CHkRS3DNpGWckaPP
    CHkRS3DNpGWckaPP
    NGOHS3yU5tKn6aRO

    • Gently remove the motherboard.

    • Hold the motherboard by its edges to prevent ESD damage. Be careful not to snag it on any cables as you extract it from the display assembly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Sam Goldheart

Mitglied seit: 19/10/12

457712 Reputation

0 Kommentare