Samsung Galaxy Tab A 7.0 Battery Replacement

Geschrieben von: Bradley Watson
  • Kommentare: 4
Samsung Galaxy Tab A 7.0 Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

20 Minuten

Einleitung

During all steps, handle every component with care as they are very delicate electronic parts.

  1. TfK1ZZbPfXsiLytn

    • Using the plastic opening tool, starting at any corner on the tablet, insert the tool between the back panel and the front panel.

    • Slide tool around the tablet to unlock the panels from one another.

  2. Y6AmQenNXpqNVZZW
    Y6AmQenNXpqNVZZW
    SPP6HNJOHPNQnJJT

    • Carefully remove the back panel from the front panel.

    • The inner components of the tablet will now be exposed.

  3. OJpcfsHLVcqkCEeB
    OJpcfsHLVcqkCEeB
    s2vSD5PqMgGOPOcN
    pMfYs2cFTeXYNlYl

    • Using tweezers, gently lift the black tab locking the wire connecting the battery to the motherboard.

    • Pull wire from connector.

    • This is the only connection for the battery to the motherboard.

  4. HFIOXpyPbwqapWLL
    HFIOXpyPbwqapWLL
    CpWDBwUialWGmEYC

    • Remove the battery from the device.

    • Separating tool may be needed in order to lift battery from device.

    Please look at videos for your particular Tab A7. There are many different models. For mine I needed to use heat to soften the glue that holds the screen to the body. This very important step is not mentioned in this guide.

    Ed Reeder -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Bradley Watson

Mitglied seit: 15/02/17

1028 Reputation

3 Kommentare

I found there was a layer of double-sided tape backing the battery, and I had to use a flathead screwdriver to get enough force to lever it up. This does not significantly change the guide.

brunius -

It would be nice if you showed which side to remove.

Bob White -

The OEM battery in my device expanded and pushed the screen from the housing. I had to temporarily separate the screen from the housing while leaving the connectors in their sockets while I pried the front housing from the back to reveal the battery. Once the front and back of the chassis were separated, I reattached the screen to the front housing and continued with the procedure. A heat gun made the process much easier by loosening the tape between the screen and housing, but was not necessary to lift the battery or separate the front from the back of the chassis.

Dan Murphy -