Einleitung

The motherboard of the Samsung Galaxy Tab E 8.0 may malfunction after overuse of the device. This guide will show how to replace the tablet's motherboard, which is attached to the front panel.

  1. ICJRkLTR6JNGhJWa
    ICJRkLTR6JNGhJWa
    nHsI4SoeuPGOIcvl
    • Use the iFixit Opening Tool to pry off the back case, moving the tool around the screen.

    • Make sure the device is off and the SD card is removed before taking off the back casing.

    deffently got to apply heat to that front screen due to the adessive bewhind or mostlikly crack the screen

    Trent Weaver -

  2. etkmjRol2aiLtHoA
    etkmjRol2aiLtHoA
    v1w2QAE6wNKRHcZe
    • Use the tweezers to lift the switch connecting the back camera to the motherboard.

    • Use your hand to remove the back camera from the motherboard.

  3. RGCPsCCiS2lJs5Oe
    RGCPsCCiS2lJs5Oe
    Mq2EfEYAGSEIiqQo
    dTaDk551cJXILAWp
    • Use the tweezers to lift the switch connecting the front camera to the motherboard.

    • Remove the front camera from the motherboard by lifting with the tweezers.

  4. pqrcWUnCLTuZb2ZE
    pqrcWUnCLTuZb2ZE
    Td6JL2RDliWUBwJj
    • Use the tweezers to flip the switch on the bottom of the strap that goes over the battery.

    • Release the strap from the switch by lifting the strap with your hand.

  5. tdRKvaaSBrffOiqW
    tdRKvaaSBrffOiqW
    XFGLLDjybMJiLRmm
    • Use the tweezers to flip the switch that connects the top of the strap to the motherboard.

    • Lift the top end of the strap with your hand and remove the strap completely from the device.

  6. XjX6aPKWaQDZIEeK
    XjX6aPKWaQDZIEeK
    KTQxvODTwsFGIFct
    • Use the tweezers to flip the switch of the connector.

    • Lift the connector from the motherboard.

    • This connector does not come completely off, but disconnects from the motherboard.

  7. 2NWE4LS2Hh2VNpan
    2NWE4LS2Hh2VNpan
    H2nGVrrsYSC6HGhY
    • Use the tweezers to flip the switch of the blue connector on the motherboard.

    • Lift the connector from the motherboard.

    • This switch can detach from the device, but just needs to disconnect from the motherboard.

    • Ensure the blue ribbon cable is not under the motherboard upon reassembly.

  8. ohAHKAROyYhPFdiR
    ohAHKAROyYhPFdiR
    p3any3IlVbFTnrbK
    • Use the tweezers to flip the switch of the connector that runs from the battery to the motherboard.

    • Lift the connector from the motherboard.

    • This switch can detach from the device, but just needs to disconnect from the motherboard.

  9. 2ICiAljYHWPV25Ug
    2ICiAljYHWPV25Ug
    jhNkSVYSDAbVNDH4
    • Use a JIS #00 screwdriver to remove the six 4.5mm screws at the top of the motherboard.

    • Lift the motherboard with your hand to detach the motherboard from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Christian Bloemhof

Mitglied seit: 08/10/18

1045 Reputation

0 Kommentare