Samsung Galaxy Tab S 8.4 Micro USB Port Replacement

Geschrieben von: Trent Chapman
  • Kommentare: 10
Samsung Galaxy Tab S 8.4 Micro USB Port Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

5 - 6 Minuten

Einleitung

If your battery does not charge consistently, or will not charge at all, your charging port may be faulty. If you are experiencing charging difficulties, the charging port may need to be replaced. This guide will show you how to do so.

  1. UgCSQDir2mIhGgCm
    UgCSQDir2mIhGgCm
    R2LMUYc64GDgQlFs

    • Place the plastic opening tool between the face of the display and rim of the back cover of the device.

    • Move the plastic opening tool in a downward motion until you see separation between the tablet and back cover.

    Will a butter knife work?

    Team Diamond (DrDiamond53) -

    You could try a credit card, avoid metal tools.

    Isaac Pettis -

    The battery is still connected at this stage so, yes, avoid metal tools.

    Once the outer frame was mostly unclipped with the opening tool, I found the ifixit triangle plastic picks useful. As well as clips around the 4 edges there are maybe 4 more clips in the centre of the back cover that are a challenge.

    Make sure the display screen and logic boards and battery all come out in one bundle, just leaving a bare plastic back shell. Others have reported that if you separate the screen from the boards you’ll invariably break a ribbon cable and lose touch sensitivity.

    Michael Morjanoff -

  2. cYDNYBVBoydJbLQp

    • By sliding the plastic opening tool around the rim of the device, carefully continue to pry apart the screen and back cover.

    • Try to separate evenly on all sides until the screen detaches from the device backing completely.

    • If this is the first time removing the back cover, it will be rather difficult to separate it from the tablet.

  3. BIWIK2lNGotFJBKg

    • Remove the back cover after the entire rim is disconnected.

    I did some diy fixing because my tab-s came having issues. All battery connection related. Easy fix about 10 minutes but now the back cover won't sit flush and there's a large gap…idk what to do now it's infuriating there no broken tabs or connections

    Jason Carlson -

  4. c5XCMCgaP4xnIKRI
    c5XCMCgaP4xnIKRI
    5a53xOIfvALwI3wc

    • Remove the two 4 mm Phillips #000 screws securing the micro USB port.

  5. VrL5ICriasFpkyBn
    VrL5ICriasFpkyBn
    65QINQANBsyS2Rgg

    • Using the plastic opening tool, disconnect the charge port from the motherboard.

    • Once disconnected, lift to remove the charging port.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Trent Chapman

Mitglied seit: 01/10/15

1360 Reputation

6 Kommentare

It is so amazing and it works!

alva chan -

Thanks a lot!

You make me a big economy by doing this myself with YOUR instructions !

Raphael

refelo123 -

What model number is this device specifically? It says WiFi, but I have the same one from a network carrier. Would this charging port work for that? Model sm-707v is the one that I have.

tailoredtoteach -

Thanks for the instructions, it looks simple , so I ordered the docking assembly and I replace it by myself.

You saved me a lot of money, thanks again!

wim-zelf -

With these instructions I ordered part from Amazon and replaced charging port and tablet charges again. Thanks!

Philip Holly -

hi,

we followed your instructions. and the tablet now charges. but we can no longer unlock the screen or do anything on the screen.

help?

Rima Jabbour -