Samsung Galaxy Tab S2 9.7 Verizon Tablet Battery Replacement

Geschrieben von: Divya Prabakaran
  • Kommentare: 1
Samsung Galaxy Tab S2 9.7 Verizon Tablet Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

9

Zeitaufwand

35 Minuten

Einleitung

Is your tablet dying quickly or not charging at all? Your battery may need to be replaced. Follow this guide and you'll know exactly how to do it!

  1. DB2DIgdDcOZyPG1b

    • Turn off the tablet before disassembly.

    • Heat up an iOpener for 30 seconds and place on all four seams of the screen. A heat gun can be used as well.

  2. iO3CSUcFKnjqNPgw
    iO3CSUcFKnjqNPgw
    C2gsxosqQVPRwxGd

    • The glue is now melted, so using the metal spudger shown, pry open all sides of the tablet.

    • When prying open near the home and touch screen buttons, use a suction cup.

    • Do not stick the metal spudger past these buttons as this may damage your device.

  3. SJBGLAPXqVRmQk6s
    SJBGLAPXqVRmQk6s
    cQi1TNsxF1GdnQLs

    • Carefully lift up the screen.

    • There is a ribbon cable attached. Lifting the screen too quickly can damage the cable.

  4. fA4vBLYQLOaGUjth
    fA4vBLYQLOaGUjth
    i1OmVy2rGbTpTVDI
    p4mRSQCUFZuYsT2a

    • Remove the ribbon cable using the Metal Spudger.

    • The ribbon may be taped underneath to the grey frame. Gently lift the ribbon to untape it.

  5. LPWVnKZShlrYhnmA
    LPWVnKZShlrYhnmA
    IaVfDMRVAuZt6SZL

    • Remove all seventeen 3 mm screws using a PH000 Phillips screwdriver.

    Be Careful, there are 2 more black screws which hold the cover to remove on the top section of this pic.

    Bo Zhang -

  6. rbYLZsS3qFoEP35s
    rbYLZsS3qFoEP35s
    VssmboJyec3mvUJZ
    txZACo1sqyRlBP6r

    • Lift the black frame using the two Metal Spudgers shown.

    • On the third picture, there is a Sim Card component that is connected to the frame and back cover. As you lift up the frame, it'll detach. This is normal.

  7. u1YAVGvNAixCwXbU

    • Once lifted, flip the grey frame over.

    • This component connects to the sim card.

    • Remember to click this component back into place when reassembling the tablet.

  8. ek4HC6ruNXOvLUWa
    ek4HC6ruNXOvLUWa
    HujsWJovE4v5s2pS
    LAGrYsCnotKpLNJJ

    • Unclip the orange ribbon cable located above the battery using the Blunt ESD Tweezer.

    • Remove the four black 3mm screws using a PH000 Phillips screwdriver.

  9. AciZuLZlGnQh2NOS

    • Hold the frame and pop the battery off from the other side.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Divya Prabakaran

Mitglied seit: 20/02/17

633 Reputation

0 Kommentare