Einleitung
Werkzeuge
-
-
Flip open the phone as shown in picture 1.
-
Remove the two screws highlighted in picture 1.
-
-
-
Take your spudger and forcefully insert it between the black and silver part of the phone.
-
Once the spudger is successfully wedged in between these two pieces, circle the frame of the phone.
-
-
-
The phone should be exposed like picture 1 once the case was removed.
-
The highlighted sections correspond to the bullet colors. To replace either simply disconnect the wires attached, and lift the piece off.
-
Speaker Component
-
Vibration Component
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
