Samsung Jack Antenna Replacement

Geschrieben von: Paul Piller
  • Kommentare: 0
Samsung Jack Antenna Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

6 Minuten

Einleitung

Use this guide to install a new speaker.

  1. wBK6tLWAubWwCS3w

    • Slide the battery cover downwards with pressure focused on the center of the cover.

    • Lift the cover off of the phone.

  2. D2rje2VFAkfOCfPp

    • Grasp the bottom left and right corners of the battery and lift it from its housing.

  3. DGWsxCn5Mbi6Exdn

    • Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.

  4. mTQnaTIb1WCV2sGL
    mTQnaTIb1WCV2sGL
    w2GEhw4F1bW2E5bO
    45GaT6UL6MJZSR6F

    • The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.

    • Insert the Plastic Opening Tool in between the front and rear cases.

    • Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.

  5. 5hMnkoKsKJqdGjPa

    • Lift the rear case off of the phone.

  6. E6wTFQAM1U1eVrhD

    • Remove the two silver 4.30 mm screws on either side of the antenna using a Phillip's #00 Screwdriver.

  7. ITuOvxTdabAaaujV
    ITuOvxTdabAaaujV
    PUGYjOo63Paorp3Y
    mIUH3WXn4BDObdZW

    • There is a wire under the antenna connecting it to the Motherboard. Do not pull off the antenna just yet.

    • Use a spudger to remove the wire connector under the antenna.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Paul Piller

Mitglied seit: 12/04/11

56 Reputation

0 Kommentare