Einleitung
In this guide, we will be replacing the USB module of the speaker, which also houses the button used in pairing the speaker for Wi-Fi capabilities. You will need to remove the bottom cover, unplug the connector from the motherboard to it, and remove it from the speaker assembly.
Werkzeuge
-
-
Flip the device so that the bottom of the device is facing you. Remove these feet with a pair of tweezers.
-
Remove the four 10mm long screws with the Phillips #1 screwdriver.
-
-
-
Remove the connector from the board by pressing down on the center tab while nudging the connector away with a spudger.
-
-
-
Use a spudger to press the plastic tab away from the board until the board pops up.
-
Remove the board with the USB module from the device.
-
To reassemble your device, follow these instructions in reverse order.
