Samsung Rogue Motherboard Replacement

Geschrieben von: Viktoria Mikoultchik
  • Kommentare: 0
Samsung Rogue Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

8 Minuten

Einleitung

This guide will provide a step-by-step procedure for getting to the main motherboard in your Samsung Rogue.

  1. kDOxOtee4YPjofVW

    • Use a plastic opening tool to carefully pry the back cover surrounding the camera up from the phone.

  2. mSaYe5AMA2OYv3Kb

    • Remove the five 3.4mm Philips screws securing the backing of the phone.

  3. 1ptIgT5Sefo46SEC
    1ptIgT5Sefo46SEC
    4EWaXZtW4RPa2ggC
    TZCTxDYLbsqcsecj

    • Use a plastic opening tool to carefully pry off the back cover.

    • Make sure you are prying along the edge and not between the two halves of the phone that slide away from each other.

    • Be careful to not drop the volume changing piece, for it can easily slip out.

  4. IFNUN5D5PmJdqOAX

    • Remove the two 3.45 mm Philips screws below the white sticker.

  5. ayZNQYiuuxEHEHXl
    ayZNQYiuuxEHEHXl
    QDldbHTLqKRLGkLc

    • Carefully lift the motherboard up from the bottom edge.

    • The film of wires is still attached to the motherboard, so do not completely remove the motherboard just yet or you may damage it.

  6. lYAU52j6iZWL2KeP
    lYAU52j6iZWL2KeP
    2TUXWQsZrlWOFULV

    • Use a plastic opening tool to disconnect the film from the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Viktoria Mikoultchik

Mitglied seit: 15/04/12

25 Reputation

0 Kommentare