Einleitung
This guide will show how to remove the face-plate of the Samsung WB2200F, and can be used to replace a broken face-plate or replace internal components of the camera
Werkzeuge
-
-
Place the camera upside down on a hard surface such as a table. Make sure that the battery compartment is visible.
-
-
-
Twist the nob counter-clockwise while pushing cover to the left. Then pull the cover up to reveal the battery.
-
-
-
Carefully slide the battery out of the camera. It can then be replaced with a new battery.
-
-
-
Remove the 6mm screws located on the bottom and sides of the camera using the using the screw driver with the JIS size 000 head.
-
-
-
Remove the two 6mm screws located underneath the battery cover using the same screw driver with the JIS size 000 head.
-
-
-
Carefully pry the face-plate away from the body of the camera, starting from the battery compartment. It should come off without too much trouble, although it may require force.
-
To reassemble your device, follow these instructions in reverse order.
