Dexter Corded Circular Saw - 1300CIS2-185.5 Carbon Replacement

Geschrieben von: Céline Chemineau
  • Kommentare: 2
Dexter Corded Circular Saw - 1300CIS2-185.5 Carbon Replacement

Schwierigkeitsgrad

Very easy

Schritte

6

Zeitaufwand

1 Minute

Einleitung

This tutorial shows you the change of only one carbon, to change the second you just have to follow the same method.

  1. FTQBOOHVOEllJsNH

    • Before you begin, remember to disconnect the mains plug.

  2. 14CZcKYFLTXZBZgb
    14CZcKYFLTXZBZgb
    NdGpsZrMAiF3iUVU

    • Remove the dust extraction nozzle, blade and edge guide.

    • Refer to the instructions for the device to remove them.

  3. IQCoTJuwtKfIJuue

    • Unscrew the screw to access the brushes.

  4. Take the carbons out of their housing.

    • Take the carbons out of their housing.

  5. h2xkPIgOiivvwAGj

    • Replace the new carbon brushes in their housing.

    • When putting the new carbon back, check that the legs of the carbons are well located in the rectangles.

  6. 3JmboSnjF22vPrBL
    3JmboSnjF22vPrBL
    JHsTwVNllcFmAnJu

    • Replace the blade, edge guide, and extraction bit on the saw.

    Bonjour qu elle sont les charbon de remplacement car impossible d avoir une référence ou autre je dois changer les miens merci de votre compréhension

    Alban Francisco -

Abschluss

you will have replace the carbon by the end of the guide

Tinte & Feder

Céline Chemineau

Mitglied seit: 29/01/20

16497 Reputation

Ein Kommentar

Bonjour c’est bien mais sur quel site avez-vous trouvé les charbons?

Bernard Tougne -