Scuf Impact Controller Back Button Replacement

Geschrieben von: Asad Ahmed
  • Kommentare: 0
Scuf Impact Controller Back Button Replacement

Schwierigkeitsgrad

Very easy

Schritte

6

Zeitaufwand

1 Minute

Einleitung

If the back button on your Scuf Impact Controller isn’t clicking properly or isn’t performing in the way it’s intended, use this guide to replace it. Before doing so, you must first inspect the back button of the controller to see if there are any pieces or solid objects preventing it from moving properly.

  1. HnMaPLcYZvUKXcL6

    • Place the controller so the back buttons are facing you.

  2. RwAHvBvudMCuboCi
    RwAHvBvudMCuboCi
    FC3F1cyoqrGfDLIj
    tDcRUCU5y6sVGTRn

    • Place an index finger behind the back button.

    • Place your thumb on the front of the back button.

  3. 2KP3QRyqMNgIUTPx
    2KP3QRyqMNgIUTPx
    TWJrrSQKkJq3axTJ

    • Slightly lift up your index finger and thumb at the same time.

  4. e1xXGqeIdkBykCcs
    e1xXGqeIdkBykCcs
    yk3lLvNnoull5Dot

    • Push the back button upward until the top piece slides out.

  5. rQHJqKDu4wyiovSE
    rQHJqKDu4wyiovSE
    UVIbYsqYfh1ROwlu
    eYXExDjTobIT2HYJ

    • Turn the back button towards the closest controller handle and take it out.

  6. 4aZT33cDoxKNQKik

    • To remove the rest of the buttons, follow these steps again.

Abschluss

After completing the steps, the controller and back button should be intact. If there are any further problems/inquiries feel free to contact Scuf Gaming Support

Tinte & Feder

Asad Ahmed

Mitglied seit: 17/01/22

160 Reputation

0 Kommentare