Sega Genesis Flashback Controller Batteries Replacement

Geschrieben von: Omar Shorab
  • Kommentare: 1
Sega Genesis Flashback Controller Batteries Replacement

Schwierigkeitsgrad

Moderate

Schritte

2

Zeitaufwand

1 - 2 Minuten

Einleitung

This guide will help you remove the batteries in your controller. This is a relatively simple guide, and you’ll only need a Phillips #000 screwdriver to complete the process.

  1. dFlnxZpVJdmije1K
    dFlnxZpVJdmije1K
    g1CiVemCBtbQEldL

    • Using a Phillips #000 screwdriver, unscrew the single screw located on the battery cover. Remove the battery cover and set it aside.

    • The screw does not detach from the battery cover, so do not attempt to separate them.

  2. VYvAduYmJkPQH2hm
    VYvAduYmJkPQH2hm
    gmq4IAfUuXiCZPiD

    • If batteries are in the battery slots and need to be replaced, then remove the old batteries by pressing them in and compressing the spring until there is enough space to take them out.

    • Insert two fresh batteries into each one of the slots by pushing the indicated negative end of the battery against the spring.

    • All AAA batteries have “+” and “-” symbols on each end of the batteries to denote the positive and negative ends.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Omar Shorab

Mitglied seit: 23/04/18

261 Reputation

Ein Kommentar

any idea where i can find a schematic for the contoller board. I just bought one of these second hand and the wireless controller won’t connect to the system. I took it apart and it’s missing a small resistor.

Scott Phaneuf -