Shark Navigator Lift-Away Upright UV725BXBRN Brush Roll Replacement

Geschrieben von: Nadir Abdusemed

Kommentare: 0

Shark Navigator Lift-Away Upright UV725BXBRN Brush Roll Replacement

Schwierigkeitsgrad

Easy

Schritte

Zeitaufwand

5 - 10 Minuten

Einleitung

Use this guide to ensure your Shark Navigator Lift-Away Upright Vacuum with Self-Cleaning Brushroll (UV725BXBRN) isn't damaged or needs a replacement. Before you start your repair make sure you have a flathead driver or a coin to turn the locks. Also, unplug your vacuum. The new technology implented in these newer models of Shark vacuums make it hard for the consumer to replace the Brushroll like the previous models. The manufactures replace it for you. So, the fix doesn’t work contact Shark so they can further assist you.

Werkzeuge

Schritt 1

Make sure to turn off the vacuum and unplug it from the outlet.

Schritt 2

Push down on the bottom of the vacuum so it can dangle.
Using a flathead screwdriver to turn the lock counterclockwise, then open the cover to access the brush roll.

Schritt 3

Clear out any debris and close up the bottom using the previous steps.
Unfortunately, the new technology implemented in the self-cleaning brush roll prevents it from being detachable. You have a guaranteed 5-year warranty from Shark. Contact them using this link.

Abschluss

To reassemble your device, follow these instructions in reverse order. Also if your self-cleaning brush roll doesn’t work at all. You have a 5-year warranty with the manufacture and will be replaced. Go to this link and they will help you immediately. https://support.sharkclean.com/hc/en-us/...