Einleitung

If you need to replace or re-install the mop head of your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed.

  1. 1L43Bncyl2CUnlEV
    1L43Bncyl2CUnlEV
    QfSffpDFxmBe165v
    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

  2. DLeK3Err2HTlZXgZ
    DLeK3Err2HTlZXgZ
    JTXbiIFHcWcTYQgo
    i3jnlQ5ZLVEuCZJq
    • Push down on the round, grey release button near the connection point, while pulling the mop head out.

    • The mop head should slide out and detach.

    • When reassembling, you should hear it click into place if it is properly installed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tyler Wicke

Mitglied seit: 17/10/18

228 Reputation

0 Kommentare