Shark Rocket Professional Floor Hose Replacement

Geschrieben von: Brad Iglesia
  • Kommentare: 5
Shark Rocket Professional Floor Hose Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

5 Minuten

Einleitung

This guide will teach you how to replace or fix the floor hose of your Shark Rocket Professional Vacuum.

Werkzeuge

  1. yUAUNd1MBdw5GZ3u
    yUAUNd1MBdw5GZ3u
    BwCOmAeInlJmROhQ

    • Look at the side of your vacuum.

    • Identify the button that says "Floor Nozzle."

    • Press this button and remove the main body of the vacuum.

    Any advice on how to replace this clip? I knocked my vacuum over and it hit my bookcase just right on this clip and broke it, so now the bottom piece and the body do not stay attached.

    Cyndy Ryann -

  2. WXhxhNURIoffUOpn
    WXhxhNURIoffUOpn
    njLkKpoQwOCkJWNr
    IAUMsUrGrYtDwMOh

    • Look at the bottom of the Floor Nozzle.

    • Use a coin to turn the orange locking dials counter-clockwise.

    • If you are unsure, follow the arrows when turning the orange dials because the labeling is confusing.

  3. QScVnP1UGFgThJfB

    • Use your fingers to pull open the panel locked by the orange mechanism.

    • If there is debris stuck in the tube, use a long, thin object to remove it.

    You don't show how to replace the hose

    sherryg1368 -

    Is there more to this somewhere?

    Cherika Laird -

    Did you mean to label this cleaning instead of replacement?

    Zack Hale -

    You don't show how to replace the hose..... I got this far on my own!

    Marty M -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Brad Iglesia

Mitglied seit: 24/01/18

316 Reputation

0 Kommentare