Skil 88 Gears Replacement

Geschrieben von: Matt
  • Kommentare: 0
Skil 88 Gears Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

3 - 5 Minuten

Einleitung

Is your motor running but the drill is not turning? Replace those gears to start providing torque to your drill bit.

  1. NxrynQYZaTXRFsCp

    • On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.

  2. VvXOFoAke5Mdj3qj
    VvXOFoAke5Mdj3qj
    vaATsNhu5FrnjVv1

    • Pull the front housing apart from the rear.

    • The motor and gears might fall out when you are pulling it apart.

  3. xrn1DqOYT6VlC62K
    xrn1DqOYT6VlC62K
    lclLDTxJjoGSranl

    • Remove gear from the divider and add the new gear.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Matt

Mitglied seit: 10/10/10

365 Reputation

0 Kommentare