Skil 88 Trigger Mechanism Replacement

Geschrieben von: Matt
  • Kommentare: 0
Skil 88 Trigger Mechanism Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

2 - 5 Minuten

Einleitung

After opening the trigger housing, one of the things you can do is replace and remove the trigger mechanism. It's as simple as getting the housing open.

  1. 13MrTdaGcalGiuGg
    13MrTdaGcalGiuGg
    wGjHRBcVEfCWBIHE

    • Use the socket wrench to remove the 0.5" length screw from the bottom of the handle.

  2. TER1nMhZIfYWnlrq
    TER1nMhZIfYWnlrq
    mn6wGx3MQu1VKEdY
    OORXnsPcFOKAi4hv

    • Separate the cord from the handle.

  3. 3OiaYRXuPT2LStYX

    • Make sure that the drill is completely unplugged.

    • Locate the two wires attached to the black trigger.

    • Pull the wires out of the trigger. It may take a bit of force.

  4. eesuiGynI5Dqfycv

    • Push the wires into the new trigger piece.

    • Make sure the wires go back into the correct holes.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Matt

Mitglied seit: 10/10/10

365 Reputation

0 Kommentare