Skullcandy Air Raid Front Panel Replacement

Geschrieben von: Timothy Potts
  • Kommentare: 0
Skullcandy Air Raid Front Panel Replacement

Schwierigkeitsgrad

Very easy

Schritte

4

Zeitaufwand

Keine Schätzung

Einleitung

  1. LB2YK4AbsgNGkdJn

    • Starting with the corners, gently pull the rubber cover off of the device.

  2. jVDJetEZVeyIYHNA

    • Using the T-6 hexagonal screwdriver, unscrew the four 10mm #6 hex screws on the right side of the device.

    • Remove the handle from the device.

  3. pDPnwiNLYTQCRoIK

    • Unscrew the two screws on the left side of the device using the phillips #00 screwdriver.

    • One 5mm Phillips screw.

    • One 8mm Phillips screw.

  4. VbL3NTQQ6bEaJ3r6

    • Gently pull the sides of the front plate outwards from the device.

    • Pull up on the front plate to remove it from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Timothy Potts

Mitglied seit: 14/01/15

201 Reputation

0 Kommentare