Einleitung
Werkzeuge
-
-
Place the drone with the top side facing up.
-
Remove the blade cover.
-
Remove the rotor blade.
-
-
-
Unscrew the 1cm screw holding in the blade lockstitch with the Phillips 0 Screwdriver.
-
Remove the blade lockstitch.
-
-
-
Lay down the drone so the battery side is facing up.
-
Unscrew all 5 .8cm screws on each arm of the drone with the Phillips 0 Screwdriver.
-
Repeat previous bullet for each arm (20 screws in total).
-
-
-
Using a bit of force, gently pull apart the lower and upper bodies.
-
Keep going until both parts are completely separated.
-
-
-
Find the gear mechanism at the end of one of the drone arms.
-
Unscrew the two front .8cm screws with the Phillips 0 Screwdriver.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.