Slingbox 500 Top Cover Replacement

Geschrieben von: David Sullivan
  • Kommentare: 0
Slingbox 500 Top Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

5 Minuten

Einleitung

  1. AuHMu4tGYO1WxxcL

    • Remove the sticker on the back of the Slingbox that covers the rear screws using a spudger.

  2. bO2SdbxdJSmPvOTW
    bO2SdbxdJSmPvOTW
    EoMDx2yyi5avk2Xg

    • Remove the seven 7.9 mm rear screws from the device using a Phillips #1 screwdriver.

    • Flip your Slingbox so the bottom is facing upwards.

    • Remove the four 7.9 mm screws using a Phillips #1 screwdriver.

    • You may have rubber feet on the bottom of your Slingbox. If you do, just gently remove them with your hands and set them aside to put back on later.

  3. XlTs1pfFbHAwjjjo
    XlTs1pfFbHAwjjjo
    SOHmPoZrT6npXdaH
    qtLhmJJOS6DtuDH1

    • Remove the upper section of the case by rotating your Slingbox to view the back and lifting up on the higher corner.

    • Use the opening tool to disconnect the small clips in the front.

    • These may require some minor force to disconnect.

    • Remove the entire top of the Slingbox and set it aside.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

David Sullivan

Mitglied seit: 19/10/21

365 Reputation

0 Kommentare