Einleitung

  1. twog4mIb5Tnvp4ma
    • Start by having the new snowboard binding and screws set aside. Make sure to also have a standard Phillips screwdriver.

  2. tl3aWkLrKLmAyrLA
    • First, align the screw and attach the plastic strip.

  3. 65PlREtqSxFGaxJ2
    • Then begin to tighten the plastic strip by using the screwdriver with one hand and then holding the nut with the other to tighten the plastic strip.

  4. VTGgHpuOa2WD5RnN
    • This is what it should look like so far.

  5. URU1WHeSVLPWUiBN
    • Now we will begin to attach the strap to the opposite side. Like previously, you will need a screwdriver to tighten the strap once you have aligned the screw and attached the nut on the other side.

  6. SAvkm4Di2lAE36qB
    • Make sure to not tighten it too much as the strap needs to be able to move slightly.

  7. shKOKNIWgGu4cFr4
    • Once everything is tightened properly this is what it should look like. Congrats you have successfully repaired a snowboard binding!!!

  8. L4w6N6YYfL6H3y1b
    • Now it's time to take a picture with your fix!

Abschluss

To reassemble your device, follow these instructions in reverse order.

Justin

Mitglied seit: 13/04/22

157 Reputation

0 Kommentare