Snowboard Binding Replacement

Geschrieben von: Loren Sunding
  • Kommentare: 1
Snowboard Binding Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

10 Minuten

Einleitung

Snowboard bindings are easy to take apart and replace. In this guide we will show you how to replace a Union Force binding. Most snowboard bindings are very similar to remove, but there may be some slight differences.

  1. NmIRuxeMH3ATFdfl
    NmIRuxeMH3ATFdfl
    TqKEbXDHTKpa65Sc
    Qe4OfUF1M6xQFBMj

    • Release the binding straps by lifting up on the buckle and pulling towards the direction of the end of the ladder.

    • Not all binding straps will release the same way. If you are having trouble releasing your binding straps, please refer to your owner's manual.

  2. NpCPXWGhhOPoK55N
    NpCPXWGhhOPoK55N
    tuUYVuR4RtvDDehl

    • Move the straps and the highback plate out of the way in order to have clear access to the foot pad screw.

    • The highback plate is the vertical support plate located on the heel side of the binding.

  3. qsKBeQKkCeR26Nrl
    qsKBeQKkCeR26Nrl
    oE3tpWRreDtKqGXx

    • Use a #2 Phillips screwdriver to remove the panhead, 10mm wide, M4 x 12mm screw located in the middle of the foot pad.

  4. FJiaxBRDI61eTVrr
    FJiaxBRDI61eTVrr
    cuYFNqETIlZGPWBv
    kHMP3SgndZOxf62d

    • Use a #2 Phillips screwdriver to remove the four ovalhead M6 x 12mm screws that attach the base plate of the binding to the board.

    • Lift or slide the binding off the board and set the screws aside.

    Hello!

    Do you hace any suggestions on fixing the baseplate if it is broken? It has structural damage: the aluminum framing has splintered. Is there a way to fix it or is my only option to just buy new bindings? :(

    Thanks!

    Jeni Chan -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Loren Sunding

Mitglied seit: 14/01/14

118 Reputation

0 Kommentare