Einleitung
Traction pads are used to give you extra grip when you have one foot out of the bindings. This guide is about detaching and attaching traction pads.
Werkzeuge
Ersatzteile
-
-
If there is any residual adhesive left from the old traction pad, soak it with adhesive remover.
-
Let the adhesive remover sit for a few minutes.
-
Wipe away the residue using a towel and water.
-
Dry the the surface where the new traction pad will be placed.
-
-
-
Peel the back off of the new traction pad to reveal the adhesive.
-
When placed, the traction pad should be about an inch away from the rear binding.
-
To avoid creating air bubbles, start with one corner of the pad and roll the rest down.
-
Press down firmly to help it stick to the board and remove any air bubbles that may have occurred.
-
Give the adhesive a minimum of 12 hours to dry before use.
-
