Einleitung
In this guide, the reader will learn how to properly remove an empty CO2 tank and replace it with a new full tank.
Ersatzteile
-
-
Remove the back cover of the device. Press in the two gray buttons found on either side, located at the top of the machine.
-
Pull back on the cover until it releases from the device. Pull the back completely off.
-
-
-
Grasp your hand firmly around the CO2 tank and twist it in a clockwise motion.
-
Once the CO2 tank is free, pull it towards you and lift upwards to remove it from the device.
-
-
-
Insert the full CO2 tank up through the hole, located at the bottom of the device.
-
Line up the new CO2 tank with the valve at the top and twist the tank in, using a counter clockwise motion.
-
-
-
Line up the small tab on the back cover with its slot near the bottom of the device.
-
Gently push the CO2 tank cover completely back onto the machine.
-
To reassemble your device, follow these instructions in reverse order.
