Einleitung
If you find your waterproof case not as watertight as you had hoped, you might want to replace the O-ring. You will need a tool to pry the O-ring from the case.
Werkzeuge
Ersatzteile
-
-
To open the case, push the yellow "Open" tab located at the bottom of the case.
-
Pull out on the yellow tabs as indicated by the circles in the photo to unlock the lid. This may be a little tricky!
-
Then, remove the lid.
-
-
-
Take the plastic opening tool and wedge it between the O-ring and the groove.
-
Then, pry the O-ring until it is out of the groove.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
